![]() The fixture is placed on a scale which measures the amount of force needed to cut the media in grams. Sharpness was measured on an Edge-On-Up Industrial Edge Tester, which uses a fixture that holds the Double X+ media. Each media is meant to test different aspects of the broadhead and the cumulative of all three tests are displayed in the key features. In the push force test, three types of media were used: doormat, closed cell foam, and faux leather. The lower the poundage required to push the broadhead through, the better. The force gauge measures the amount of force in pounds. To do that, a digital force gauge that’s held in a test stand is used to push broadheads through different media. ![]() Push Force is the closest thing to quantifying broadhead penetration. The resulting wound channel was then measured with calipers and is displayed in the test results. The setup shot about 260 fps.Įach broadhead was shot into a 10 percent clear ballistics gel block. The setup was bare shaft tuned prior to the accuracy test. All the heads selected as one of the best broadheads for deer had the same impact point as my field points at 40 yards.Ī 60-pound Mathews Traverse shooting 250 spine Black Eagle Rampage arrows fletched with three TAC Driver 2.75 in a helical configuration were used for the testing. Both groups were measured with a caliper and the group average is displayed in the test results. I shot two 40-yard groups with three of the same model broadhead.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |